Products related to Peltier:
-
Thermoelectric Peltier Module, High Temperature Thermoelectric Power Generator Peltier TEG
Thermoelectric Peltier Module, High Temperature Thermoelectric Power Generator Peltier TEG
Price: 2.71 € | Shipping*: 1.01 € -
Autumn Peltier, Water Warrior
The seventh generation is creating A sea of change. It was a soft voice, at first. Like a ripple. But with practice it grew louder. Indigenous women have always worked tirelessly to protect our water - keeping it pure and clean for the generations to come.Yet there was a time when their voices and teachings were nearly drowned out, leaving entire communities and environments in danger and without clean water. But then came Anishinaabe elder Grandma Josephine and her great niece, Autumn Peltier. Featuring a foreword from water advocate and Indigenous Rights Activist Autumn Peltier herself, this stunning picture book from New York Times-bestselling author Carole Lindstrom and illustrator Bridget George gives voice to the water and asks young readers to join the tidal wave of change.
Price: 15.99 £ | Shipping*: 3.99 £ -
TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements Module for Cooler
TEC1-12705 Thermoelectric Cooler Peltier 40X40mm TEC12705 Peltier Elements Module for Cooler
Price: 2.79 € | Shipping*: 1.99 € -
DIY Peltier Cooler Kit 12V Semiconductor Cooler Peltier Cooling System, Heatsink Module
DIY Peltier Cooler Kit 12V Semiconductor Cooler Peltier Cooling System, Heatsink Module
Price: 30.69 € | Shipping*: 0 €
-
How does a Peltier element work?
A Peltier element works based on the principle of the Peltier effect, which is the phenomenon of heat absorption or release at a junction between two different conductors when an electric current flows through it. When a current passes through the Peltier element, one side of the element absorbs heat while the other side releases heat. This allows for the element to act as a heat pump, transferring heat from one side to the other. Peltier elements are commonly used in applications such as cooling systems and temperature control devices.
-
How to control a Peltier element?
A Peltier element can be controlled by adjusting the current flowing through it. By varying the amount of current, the temperature difference created by the Peltier effect can be controlled. This can be achieved using a simple electronic circuit with a power supply and a variable resistor to adjust the current. Additionally, a temperature sensor and a feedback control system can be used to maintain a specific temperature by adjusting the current flowing through the Peltier element. It is important to note that the polarity of the current also affects the direction of heat transfer, so the direction of current flow should be considered when controlling the Peltier element.
-
Would my Peltier element cooling work?
The effectiveness of a Peltier element cooling system depends on several factors such as the size and power of the Peltier element, the heat load that needs to be removed, and the thermal insulation of the system. It's important to ensure that the Peltier element is appropriately sized and powered to handle the heat load, and that the system is well-insulated to prevent heat leakage. Additionally, the ambient temperature and airflow around the Peltier element can also impact its performance. It's recommended to carefully consider these factors and potentially consult with a thermal engineering expert to determine if a Peltier element cooling system would work for your specific application.
-
Is a Peltier cooling box counterproductive?
A Peltier cooling box can be counterproductive in certain situations. While it can effectively cool the contents inside the box, it also generates heat on the outside, which can lead to an overall increase in temperature in the surrounding environment. This can be counterproductive if the goal is to maintain a consistently cool temperature in the area where the box is located. Additionally, Peltier cooling boxes can be less efficient than traditional compressor-based cooling systems, leading to higher energy consumption and potentially higher costs. However, in certain applications where precise temperature control is not critical, a Peltier cooling box can still be a useful and convenient cooling solution.
Similar search terms for Peltier:
-
TEC1-12706 Peltier Elemente Module 12V 5.8A Cooling Peltier Plate Module 40x40MM
Specification: Origin: Mainland China Type: Module Condition: New Model Number: Integrated Circuits Chip Model: TEC1-12706 Dimensions: 40403.8mm, 127 couples of elements Wire Specifications: Lead length of approximately 300±5mm, RV standard wire with a single 5mm tinned head Internal Resistance: 2.12.52 (tested at environmental temperature of 23±1℃, using 1kHz AC) Maximum Temperature Difference: Tmax(Qc-0) above 60℃ Operating Current: Imax=5.8A (approximately 4.5A based on 12V constant voltage and heat dissipation capability) Rated Voltage: DC12V (Vmax: 15V, starting current 5.8A) Cooling Power: Qcmax 58-65W Mounting Pressure: 85N/cm2 Operating Environment: Temperature range -55℃ to 83℃ (excessively high ambient temperatures directly affect cooling efficiency) Encapsulation Process: Standard 704 silicone rubber sealing around the edges Packaging Standard: Foam box packaging, storage conditions with environmental temperature of - Storage Conditions: -40℃ to 60℃ Application Areas: Food and beverage service refrigerators Portable car cooling boxes Liquid cooling systems Temperature stabilizers CPU coolers and scientific instruments Photonics and medical systems Usage: How to achieve cooling? 1. Prepare the following components: cooling plate, heat sink, thermal grease, insulation pad, and power supply. 2. Apply thermal grease to the cooling and heating surfaces of the cooling plate. 3. Install the cooling plate onto the heat sink, placing an insulation pad in between. 4. Tighten the screws, apply power, and start cooling. Note: 1. Cooling plate operates with one side cooling and the other side heating, ensuring efficient heat dissipation from the heating surface during operation. 2. Strictly avoid powering the device for more than 2 seconds without proper heat dissipation to prevent overheating and potential damage. Buyers assume responsibility for any damages caused by improper usage. 3. It is essential to apply thermal grease when installing the cooling plate onto a heat sink. 4. The side with markings is the cold surface, while the unmarked side is the hot surface. 5. Proper installation of a heat sink or water cooling device on the heat-absorbing surface is necessary to prevent damage. 6. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 7. Please allow 1-2cm measuring deviation due to manual measurement.
Price: 53.99 £ | Shipping*: 0.0 £ -
10Pcs Elements Peltier TEC1-12706 Thermoelectric Peltier Module 12706 TEC 12V 4.5A DIY Cooler
10Pcs Elements Peltier TEC1-12706 Thermoelectric Peltier Module 12706 TEC 12V 4.5A DIY Cooler
Price: 12.89 € | Shipping*: 3.84 € -
TEC1-12706 Thermoelectric Cooler Peltier TEC1-12705 12V 5A Cells Peltier Elemente Module TEC1-12704
TEC1-12706 Thermoelectric Cooler Peltier TEC1-12705 12V 5A Cells Peltier Elemente Module TEC1-12704
Price: 1.13 € | Shipping*: 1.99 € -
Peltier Effect Thermoelectric Module (40x40mm) (51W/6A)
A thermoelectric module is a solid state device which can operate as a heat pump to transfer heat utilising the Peltier effect. Suitable for cooling or heating applications up to 100 degrees C. Optimum Input Current (Imax) (Th=27DegC) : 6A Maximum Cooling Power (Qmax) : 51.4W Temperature Differential (DT) (Th=27DegC) : 68 Optimum Input Voltage (Vmax) (Th=27DegC) : 15V
Price: 45.97 £ | Shipping*: 0.0 £
-
Why is the Peltier element not cold?
The Peltier element is not cold because it is a solid-state device that operates based on the Peltier effect, which involves the transfer of heat from one side of the element to the other when an electric current passes through it. This means that one side of the element will become cold while the other side will become hot, depending on the direction of the current. Therefore, the Peltier element itself is not inherently cold, but rather it can be used to create a temperature differential by transferring heat.
-
How does the Peltier control system work?
The Peltier control system works by utilizing the Peltier effect, which is the phenomenon where a temperature difference is created between two electrical junctions when an electric current is passed through them. In the control system, this effect is used to either heat or cool a specific area by controlling the direction of the electric current. By adjusting the current flow, the system can regulate the temperature of the area being controlled. This allows for precise temperature control in applications such as refrigeration, heating, and thermal cycling.
-
How can one control a Peltier element?
A Peltier element can be controlled by adjusting the direction and magnitude of the current flowing through it. By changing the polarity of the current, the Peltier element can either heat or cool. Additionally, the temperature difference created by the Peltier element can be controlled by varying the current intensity. Using a temperature controller or a microcontroller, one can automate the control of the Peltier element based on the desired temperature setpoint.
-
How does one operate a Peltier element?
A Peltier element is operated by applying a direct current (DC) voltage to the element. When a current flows through the element, one side of the element becomes hot while the other side becomes cold. By reversing the direction of the current, the hot and cold sides of the element can be switched. This allows the Peltier element to be used for cooling or heating applications depending on the direction of the current flow.
* All prices are inclusive of VAT and, if applicable, plus shipping costs. The offer information is based on the details provided by the respective shop and is updated through automated processes. Real-time updates do not occur, so deviations can occur in individual cases.